The advantages of TTSL for drying of buildings or water damage restoration:
TTSL takes over all monitoring assignments in your drying installations, informs you around the clock of any problems and calls you immediately when the drying process is completed and the equipment can be dismantled. With TTSL, you can dispense with cost-intensive intermediate measurements by service engineers!
In addition, the system can immediately send you an alarm signal in the event of machine or power failure. Set up, dismantle, finished! You do not have to inspect your objects more often than that, because this task is done by TTSL.
TTSL remote monitoring for desiccation contractors – three example scenarios:
1. Standard drying with no failures…
Set-up and activation of the drying system, TTSL is installed and monitors the material and room air humidity, temperature and machine status. TTSL reports that the specified climate conditions have been attained, the drying process is completed.
The service technician drives over to dismantle the system, manual intermediate measurements are dispensed with – the system does not stay in operation one day longer than necessary!
2. Power failure or machine switch-off during drying…
The equipment is switched off at night and not switched on again in the morning, or the power supply is not interrupted otherwise. Normally, this would only be noticed on the next inspection visit. The duration of the drying process is thereby considerably lengthened!
However, when TTSL is installed, it monitors the machine status around the clock, registers the machine shutdown or function failure and immediately sends an SMS alarm message to the responsible service engineer who can then contact the customer and usually solve the problem by telephone.
3. Unexpected failure…
Set-up and activation of the drying system, TTSL is installed and monitors the temperature as well as the material and room air humidity.
After initial drying in accordance with expectations, TTSL registers that the values are no longer dropping or are even starting to rise again. Possible reason: the damage had not been remedied correctly or another undiscovered fault is beginning to manifest. Without TTSL, the new situation would only be discovered on the next inspection visit. With TTSL installed, deviations from the specified drying process can be immediately registered and the responsible service technician can be notified to take the necessary measures in the event of exceeding or undershooting defined threshold values.
For this reason, more and more successful service providers are choosing TTSL – the online remote monitoring and control system for drying systems. Why not make use of TTSL’s advantages in your company? TTSL VE and PRC allow you to react with greater flexibility and to provide your clients with a whole new scope of services!