Deliverable TTSL system components:
TTSL - base models:
The base model is also available with a power backup. Additional accessories allow the TTSL 4 system to send a text message to notify the operator of a power cut, even when it is the base model that is affected. If power is resumed within a minute, then the system once again informs the operator via SMS of the new situation. 
for electrodes 1.5 m 
for measurement cable 10 m 
and rod antenna 
Control Center 
universal adaptor for connection of all flow rate gauges with an output signal of 4-20 mA 
for TTSL 4 
TTSL sensors:
TTSL flat electrodes |
|
|
| |
TTSL borehole probe |
|
|
| |
TTSL heavy duty climatic sensor RH/temp. |
|
|
| |
TTSL climatic sensor RH/ temp. |
|
|
| |
Gauze filter |
|
|
| |
Sinter filter |
|
|
| |
Status alarm system |
|
|
| |
Status alarm system |
|
|
| |
Status alarm system |
|
|
digital relay 0/1, monitor and alarm signal in case of malfunction | |
Liquid and fluid level sensor |
|
|
| |
Distance and fluid level sensor |
|
|
| |
pH sensor |
|
|
| |
|
measurement range -1,600 mV to + 1,600 mV, accuracy ± 1 mV | |
Conductivity sensor |
|
|
measurement range 0 to 2,000 µS/cm, 0 to 20.0 mS/cm, 0 to 1,000 mS/cm | |
Dissolved oxygen sensor |
|
|
measurement range 0 - 20 ppm, dissolution 0.01 ppm, accuracy ± 0.2 ppm, for ¾ inch pipe fitting | |
Flow rate sensor |
|
|
|
and TTSL electrode tips 
Standard configuration for resistance measurement using vacuum process. Optionally available TTSL measuring sensor which can be installed to measure the RH/temp. of the discharged air (fig.A) 
G 3/8 inch, 25 bar pressure-resistant design. Fields of application: 0 to 100% RH, -40 °C to +160 °C 
Optionally with gauze or sinter filter. Fields of application sensor type 1: 0 to 100% RH, -30 °C to +70 °C; Fields of application sensor type 2: 0 to 100% RH, 0 °C to +50 °C 
(air/gas) for climate sensor types 1 and 2 
for climate sensor types 1 and 2, suitable for use in rough conditions, min. air flow rate 1.5 m/s 
230 V16 ampere/volt 230 V, power supply monitor (power cut alarm) 
400 V16 ampere/volt 400 V, power supply monitor (power cut alarm) 
for water and heating oil, pressure sensor 0-250 mbar 
Ultrasonic sensor to create a fluid level remote monitoring system for diverse materials 
measurement range 0 - 14 pH, accuracy ± 0.02 pH 
flow rate sensor application: water, wastewater, paints, acids, caustic solutions. Minimum conductivity 5µS/cm, measurement accuracy dependent on type 0.2%/0.5%, nominal width band DN 15…600