Technical data air purifier HealthPro 150

Filtration performance
Certified total system efficiency Higher than 99.97 % for particles ≥ 0.3 microns (µm)
Certified air flow rate yes
Tested for leakage yes
EN1822 type-tested yes
EN1822 classification HEPA Class H13:
MPPS efficiency ≥ 99.95 % for 0.22 µm at an air flow rate of ≤ 190 m³ / h
HEPA Class H12:
MPPS efficiency ≥ 99.50 % for 0.16 µm at an air flow rate of ≤ 475 m³ / h
Filter configuration
Preliminary and
gas filter
Type: PreMax MG high-capacity, high-interception Class F8 fine dust preliminary
and gas filter combined element
Filter medium: Medium with a high degree of interception of ASHRAE 85 %, 55 % efficiency for 0.3 µm; granulated active charcoal and KMnO4 impregnated aluminium oxide
Function: Interception of coarse and fine dust particles; protection for successive filters;
interception of a broad band of gaseous and chemical substances
Volume: Pre-filter surface 1.9 m², gas filter weight approx. 1 kg
HEPA filter Type: Highly efficient HyperHEPA clean room class particle filter
Filter medium: HEPA Class H12/13; finely folded with solvent-free separating webs
Function: Interception of ultra-fine particles like allergens, bacteria, spores and viruses
Volume: Surface 5.0 m²
Technical specifications
Suitable* for room sizes up to** approx. 45 m² area resp. 113 m³ volume
Air flow rate***
and sound level****
per fan stage (approx.)
Stage 1: 40 m³ / h 22 dBA
Stage 2: 80 m³ / h 45 dBA
Stage 3: 140 m³ / h 52 dBA
Stage 4: 190 m³ / h 60 dBA
Stage 5: 240 m³ / h 69 dBA
Stage 6: 350 m³ / h 74 dBA
Weight (incl. filter) approx. 13 kg
Input voltage 230 V / 50 Hz
Power input max. 160 W
Dimensions (L x W x H) 380 x 410 x 610 mm
Fan type Centrifugal, backward curved, with overheating protection,
suitable for continuous operation
Control panel 4-button LCD display with 2 lines of 16 characters each
Air inlet arch-shaped at system base
Air outlet 320° even-flow, horizontal distributor
Housing colour / Fastener arms colour Light grey / White
Housing material Odourless, impact-proof, UV-stabilised ABS plastic
* based on air exchange rate 3; ** the surface specification in sq. metres is based on an assumed room height of 2.50 m
*** in new condition with tolerance ± 10 % (± 10 m³ / h); **** according to EMPA measurement in compliance with standard EN ISO 3744
Standard features
Display language selection German, English, French, Italian
Intelligent filter service life monitor yes
Filter service life status LED yes
Programmable timer (hourly/daily) yes
Timer status LED yes
Remaining time clock yes
Adjustable filter contamination index yes
Included accessories Remote control (incl. batteries), set of castors, mains cable
Certification and authorization IEC / IECEE (CB-Scheme), CE, SEV, KTL, PCBC, EZU (depending on voltage)